J1 Serial Console

Solder a 2.54 mm male pin header onto the Lidl Silvercrest and connect a 3.3 V USB-to-serial adapter with Dupont wires. Three wires, no power from the adapter.

TYGWZ1 REV1.0.2.7 U3 flash TYZS4 EFR32 RTL8196E 5 V power unplugged J1 6 SWCLK 5 SWDIO 4 RX 3 TX 2 GND 1 3V3 board flipped: solder side VCC TX RX GND 3.3 V USB-to-serial adapter USB to the PC VCC: unconnected $ picocom --baud 38400 --flow n \ /dev/ttyUSB0 38400 8N1 ยท no flow control

    Simplified diagram, not to scale, for the Lidl Silvercrest. Pin 1 is at the bottom. Adapter pin order varies between models: follow its silkscreen, not the order shown here. The Sengled G4 has a different connector, see 0-Hardware/sengled-e39-g8c/.